Product Information:

Suitable for the light weather conditions, the car cover is known for its outstanding performance.  The custom product is best for outdoor use. With three layers of UV resistant and tough materials, it protects your car against water, moisture, hot sun and other weather conditions.

The light-weight material used in the car cover is easy to use and elegant as well. With superior breathability and complete covering, these are resistant to dirt, dust, mold, moisture, and other hazards. With your car exteriors are absolutely covered with a strong, soft, effective car cover, you can expect shining car body for years.

Feature Guide:

• 3-layered and custom fit for optimum protection
• Best for light weather conditions
• High strength car cover
• Better UV resistance
• Custom mirror pockets
• Excellent heat insulation
• Highly breathable and water resistant
• Compact and light weight
• Easy to wash and store
• Superior for outdoor use
• Backed with 1 year warranty
• Made in USA.

Installation Guide:

BEFORE INSTALLATION

1. Read instructions carefully before starting the installation of the cover.
2. Follow the instructions as detailed in the guide.
3. Use cloth reinforcements or Mystic brand tape to support abrasion prone areas.
4. Be careful about any sharp objects on the car.

STARTING INSTALLATION

1. Place cover over the center of the car and start spreading.
2. First of all cover the mirror pockets and then apply the cover over the bumpers.
3. This makes installation easy particularly in windy conditions.
4. Pay special attention to any antenna or mirror pocket area while installing the car cover.
5. Take cover on to the front and rear bumpers one by one.
6. Use the front & rear elastic ends of the cover to securely fix on the vehicle.

REMOVAL OF COVER

1. For removing the cover, release both ends of the cover from under the bumpers.
2. Fold up both sides of the cover on to the top of the car.
3. Then start folding from front to the back.
4. Store the cover in storage bag.

NOTE: Never try to move or drive the vehicle with cover still on.
           Never store wet cover in the bag.

Cleaning Instruction:

The recommended washing for Mosom Plus car covers is hand washing. There are two ways when applying hand wash -

METHOD ONE:

1. Fill a large tub with one gallon of cold water and add two cups of eco- friendly mild laundry detergent.
2. Stir it and soak the car cover for 5 -10 minutes to allow the dirt to loosen.
3. Wash and rinse.
4. Air dry by placing it on the vehicle.

METHOD TWO:

1. Place the cover on the vehicle.
2. Apply washing mix all across and hose it off.
3. For cleaning inner surface turn the internal side out and spread on the car, hose it off.
4. Remember that this process is applicable if there is no external antenna on the vehicle.

NOTE: Do not store wet cover in the bag.