Product Information:

Silverguard is the high-strength single layer outdoor car cover. Perfect for Sunbelt states, the car cover comes with two times silver PU coated UV-reflective material that ensures 100% protection against UV rays.

The polyester material caresses your car paint with soft touch for optimum safety. Powered with heat insulation and abrasion resistant features, the car cover protects your car exteriors against intense sun, extreme heat, abrasions, and moderate weather conditions such as rain and snow.

A Silverguard material is easy to use and maintain as well. The strong 300 x 300 denier polyester material is shrink resistant, dry quickly, and strong that ensures hassle-free car care solution to car owners. Silverguard is available in a unique silver grey color.

Feature Guide:

• Superior UV resistance with silver-coated UV inhibitor
• Two times PU coated at back
• Highly water resistant
• High strength
• Easy breathability
• Abrasion resistance
• Optimum protector from harsh weather conditions
• Resistant to sun fading
• Compact & easy to use
• Made from strong 300 Denier Polyester
• Heat insulation through reflection
• Well- balanced protection
• Wrinkle and abrasion resistant
• Can be machine-washed or dry-cleaned
• Retains heat-set pleats and crease.
• Available in an exclusive silver color
• Sleek and sporty look

Installation Guide:

BEFORE INSTALLATION

1. Read instructions carefully before starting the installation of the cover.
2. Follow the instructions as detailed in the guide.
3. Use cloth reinforcements or Mystic brand tape to support abrasion prone areas.
4. Be careful about any sharp objects on the car.

STARTING INSTALLATION

1. Place cover over the center of the car and start spreading.
2. First of all cover the mirror pockets and then apply the cover over the bumpers.
3. This makes installation easy particularly in windy conditions.
4. Pay special attention to any antenna or mirror pocket area while installing the car cover.
5. Take cover on to the front and rear bumpers one by one.
6. Use the front & rear elastic ends of the cover to securely fix on the vehicle.

REMOVAL OF COVER

1. For removing the cover, release both ends of the cover from under the bumpers.
2. Fold up both sides of the cover on to the top of the car.
3. Then start folding from front to the back.
4. Store the cover in storage bag.

NOTE: Never try to move or drive the vehicle with cover still on.
            Never store wet cover in the bag.

Cleaning Instruction:

CAN BE MACHINE WASHED & DRIED OR DRY-CLEANED.
When choosing to wash Silverguard car covers in the machine, follow the instructions mentioned below:

1. Remove the cover from the car.
2. Fill cold water upto the desired level, use eco-friendly non-caustic, non-toxic, biodegradable anionic laundry detergent
3. Use gentle wash cycles for 5 minutes.
4. Use 2 cycles for rinsing.
5. Machine-dry at a low temperature.
6. Remove as soon as the tumbling cycle is complete.
7. Apply moderately warm iron for ironing.

NOTE:

Do not use a fabric softener.
Do not use small domestic machines.
Do not use agitator.
Do not use automatic dryer.
Do not store wet cover in the bag.