Product Information:

Poly Cotton seat covers comes with the rare mix of comfort and style. While the pure cotton enhances the durability and Polyester material makes them elegant and vibrant. Designed to optimum protection against daily abuse and outdoor lifestyles, the auto accessories are easy to install and perfect choice for outdoor purpose.

Seat covers are custom tailored and fit so well that they rival your vehicle’s original upholstery. The custom design assures optimum protection to your car seats and greater convenience inside your car. With the vibrant patterns available to choose from, you can personalize the look and feel inside your vehicle.

Feature Guide:

• Made from strong and elegant fabrics
• Soft and comfortable materials
• Greater protection with vibrant interiors
• Can be boiled, bleached and dyed
• Can be ironed at high temperature
• UV resistant
• Tolerance to wide temperature variation
• High color fastness
• High resistance to tear & puncture
• Abrasion resistant
• Can be hand washed, machine washed or dry cleaned
• Backed with a 1-year warranty

Installation Guide:

Steps to follow:
A) Remove Headrest
B) Install Backrest
C) Install Bottom Cover
D) Installation on solid bench seats
E ) Console cover installation

REMOVAL OF HEADREST
A headrest can be removed in any of the following ways:

1. Depress both side tabs and start lifting the headrest. If required take help from another person.
    
2. Headrest with PIN HOLES on top
   
   1. Insert a paperclip end into the hole on the side of the head rest top.
   2. While pressing the paper clip, lift headrest.
3. SLOT   & TAB
   
   1. Depress the tab and press into the slot at the same time, and lift the headrest. This may require more than one person.
4. PINHOLE & TAB
   
   1. Insert a paperclip end into the hole on the side of the headrest base.
   2. While pressing the paperclip, press the tab on the other base.
   3. While pressing both lift the headrest.
      
      This may require more than one person.
      NOTE: Place the headrest cover and put the headrest aside to be attached after covering the backrest.

BACKREST INSTALLATION

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
2. for BUCKET SEAT with Non-Removable Headrest
   
   1. Fold the seatback forward to gain better access while passing the flap through.
   2. Pass the cover through the backrest.
   3. Attach velcro to the flap which is passed through the opening between seat back & seat bottom.
   4. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
3. for BUCKET SEAT with Integrated Seat Belts
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
4. for High Back BUCKET SEAT
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
       
5. for 60/40 SPLIT BENCH
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Pass flap through the opening between seatback & seat bottom, then attach velcro.
   3. Make adjustments to settle the cover smoothly over the backrest for extra custom look.
      
      NOTE : Attach the headrest over the backrest after placement of Backrest cover.

INSTALLATION OF SEAT BOTTOM COVER

1. 
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. Position cover over seat bottom.
   3. Pass flap through.
   4. Attach buckles & hooks.
   5. Tuck excess material behind plastic trim pieces for an extra custom look.
       
2. for SOLID BENCH style
   Follow instructions mentioned below if you have a solid bench Seat ( three people can sit on the seat) ( with or without headrests).
   
   1. Fold the seatback forward to gain better access for passing the cover through easily.
   2. If the seat has the folding armrest, place it in “up“ position.
   3. Place seat cover over seat bottom.
   4. Tuck flap through the opening between seatback & seat bottom.
   5. Affix straps.
      NOTE : Some seat bases are not covered.

CONSOLE COVER INSTALLATION

Steps to follow:

• Open console.
• Cover console top.
• Then cover console bottom.
• Pass console bottom flap through opening.
• Affix Velcro.

NOTE: Refer to Special Instructions & Finishing Touches for special needs and extra custom look.

SPECIAL INSTRUCTIONS – I

Seats with airbags, Lumbar supports and armrests require special instructions:

1. Seats with Integrated Seat Airbags must be covered only with seat covers designed with opening flaps. The flap inserts inside the cutout, and should be able to open freely in case of deployment. If your vehicle has seat mounted airbags, be certain that the seat covers have airbag cutouts or flaps.
   NOTE:  Do not cover seat airbags.
2. Some levers or controls may require a slit in the seat cover.

Cleaning Instruction:
 
Poly Cotton Custom Car Seat Covers can be hand washed, machine washed or dry cleaned.  When they get dirty, simply throw them in home washing machine with cold water on gentle cycle of mild detergents and air dry.

In order to keep the fabric colors like new, turn clothing inside-out before washing. Wash dark colors in cold water and light colors in warm water. If the cover is very dirty, pre-soak in detergent mix for half an hour. Stains respond well when treated with an all-purpose commercial stain remover.

When choosing to machine wash, remove seat covers from the car seat for washing and follow the instructions given below.

MACHINE WASH

TYPE OF MACHINE - Use large automatic speed control washers without agitators.
TYPE OF DETERGENT – Always use eco- friendly non-caustic, non-toxic bio-degradable anionic laundry detergent.
TEMPERATURE – 20 TO 27 * C
WASH CYCLES –  Run 5 minutes of gentle wash cycles.
NUMBER OF CYCLES – 2 for rinsing, 1 cycle to half – dry.
IRON – Warm to hot.
WASH PROCESS – steps to follow: 

1. Fill machine with cold or warm water upto the desired  level and mix 2 cups of detergent as described above.
2. Soak for 5 minutes to help loosen the dirt.
3. Wash the covers through 5 minutes of gentle cycles.
4. Rinse with two cycles of cold water.
5. Again rinse one cycle to half dry.
6. Flat dry in normal temperature.
7. Fold quickly to reduce wrinkling.
8. You may use warm to hot iron.

This washing technique protects finishing treatments on the fabrics.

NOTE:

• Do not use agitator as it may tear-off or rip the product.
• Do not use automatic dryer.
• Do not use a fabric softener.

HAND WASH

For fine fabrics a gentle hand wash with mild detergent is recommended. Also if the covers are not very dirty, use hand washing instead of machine.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file