Product Information:

• Made of Silver Guard material
• Sizes to fit most popular models
• Fitted with elastic hems
• Durable double stitching
• Nylon grommets for lock and cable kit
• UV protection
• Fire resistance
• Strong & durable
• Keeps your vehicle clean & dry
• Saves your ATV from Sun, Rain & Snow

Our ATV covers are made of silver guard fabric to ensure excellent outdoor protection of your vehicle. Silverguard is a special drill fabric which is fortified with heat, sun and water resistant coatings. Protectiondeals’ double stitching technique used for making ATV covers gives the requisite strength to the ATV cover. Our ATV covers save your precious special purpose 4-wheeler from rain, sun, snow and acid attacks.

The ATV covers are fitted with elastic hems at front and rear ends to give perfect fitting on your vehicle. Nylon grommets provided on ATV covers allow for hassle free locking for security.

Feature Guide:

• Polyester drill silver guard material
• Fitted with elastic hems at both ends for perfect fit
• Equipped with nylon grommets for smooth functioning of safety locks
• UV protection
• Heat insulation
• Strong & durable
• Breathable
• Strong double stitching technique
• Optimum protection from dirt & dust
• Protection from bird droppings & tree droppings
• Stable in windy conditions
• Mildew & rot resistant
• Fire resistant
• Water repellent
• Available in light grey color
• Eco-friendly
• Safe for human contact
• No volatile emissions
• No effect of air pollution
• No obnoxious odors
• Packs small & light

Carefully read the instructions given in the manual provided with the product before starting the installation of Universal ATV Cover on the ATV. Following the proper procedure will allow you to effectively protect your ATV.

STEPS TO FOLLOW:

1. If there are any protruding areas or sharp objects or features on your ATV, pay special attention to these areas and first position the cover over such parts.
2. Place the cover over the center of the ATV and start spreading front to back.
3. Then pull the cover over to sides of the ATV one by one.
4. Walk around the ATV and see if the cover has been properly draped over the entire vehicle.
5. Give finishing touches to the Universal ATV Cover wherever there are any loose ends.
6. Use the front & rear elastic ends of the cover to securely fix the ATV Cover on the vehicle.

REMOVAL OF COVER

1. For removing the cover, release both the front and rear ends of the cover.
2. Fold up both sides of the cover on to the top of the car.
3. Then start folding from front to the back.
4. Store the cover in storage bag.

NOTE: Never try to move or drive the vehicle with cover still on.
            Never store wet cover in the bag.

Silverguard ATV covers can be either machine washed or dry-cleaned. If you wish to use machine for washing your ATV cover, follow a few simple steps listed below:
Recommended Machine – Commercial washer without agitators.
Recommended Detergent – Eco –friendly, non- non-caustic, non-toxic, biodegradable anionic laundry detergent.
Recommended Temperature – 20 -27 degree centigrade.

STEPS TO FOLLOW:

1. Remove the cover from ATV.
2. Fill machine with a mix of water and above specified detergent upto the desired level.
3. Submerge ATV Cover in this mix and operate for 5 minutes of gentle wash cycles.
4. Rinse ATV Cover with 2 cycles.
5. Machine-dry at a low temperature.
6. Remove the ATV Cover from the machine when the tumble cycle is complete.
7. Let it dry by air.
8. You may apply moderately warm iron for ironing.

NOTE:
Do not use a fabric softener.
Do not use small domestic machines.
Do not use agitator.
Do not use automatic dryer.
Do not bleach.